Fifth wheel hitches for your
2022 RAM 3500

This 32K M5 is keyed to RAM's factory puck system on 2015-plus 2500/3500 trucks, so it levers in and out without bed rails. The dual-jaw grip is firm and the ride is smooth, but it's serious overkill unless you're pulling something genuinely heavy.

A 27K M5 keyed to RAM's puck system, so it lifts in and out by hand once seated. The dual-jaw head keeps the kingpin snug and chucking low, a strong all-around pick for RAM 2500/3500 owners hauling a heavier rig.

This is the benchmark 25K puck-mount Companion that every other fifth wheel gets measured against. It drops into factory pucks, pops out with a lever when you want your bed back, and tows dead quiet thanks to the cushioned, fully-articulating head.

The 25K OEX SuperLite is the lighter-weight version of the OEX puck hitch, still good for 25,000 lbs and easier on your back at install. Ride is solid if a hair less plush than the heavier Super 5th, and the value is a little friendlier.

A 25K OEX Super 5th fixed head for puck-equipped trucks, delivering the full-strength build and minimal chucking PullRite is known for. Great capability and a tidy puck install, but it sits at the premium end of the price range.

The 24K SuperGlide is the gold standard for short-bed trucks, automatically sliding the hitch back when you turn so the trailer clears the cab without you touching a thing. It drops into factory pucks and tows incredibly smooth; the auto-slide mechanism is the trade you make on a slightly fussier install.

A 21K Autoslide puck-mount built for short-bed rigs that need clearance in sharp turns without a manual slide. It does its job at a reasonable price, though the sliding hardware makes it heavier to set and the ride is middle-of-the-road.

A 20K sliding Companion aimed at short-bed owners who need extra turning clearance between cab and trailer. The slider adds a step at install and a manual move before sharp turns, but the head still tows cushioned and quiet.

A 20K M5 set up for RAM's factory puck system on 2500/3500 trucks, dropping in without bed rails. The dual-jaw head tows quietly and the capacity suits the bulk of fifth wheels out there, a smart everyday pick for RAM owners.

An 18K Autoslide puck-mount aimed at short-bed owners who want auto cab-clearance without manual sliding. Solid value for the auto-slide feature, but it's heavier to mount than a fixed head and ride quality is middling.

A 25K A-Series sliding fifth wheel for short-bed trucks, bolting to standard rails and sliding manually to clear the cab in tight turns. The articulating head and value are strong, though the slider takes more effort than a fixed head and a bit more to install.

The 24K SuperGlide rail version brings PullRite's automatic short-bed slider to trucks set up with standard rails, self-sliding on turns for full cab clearance. Tows great for 24,000 lbs, but you need the rails installed and the auto-slide head is heavy.

The 24K ISRX Super 5th is a fixed rail-mount head designed for ISR rail systems, rating 24,000 lbs with the premium Super 5th build. Solid and quiet on the road, provided your bed already has the ISR rails to bolt it to.

The 24K ISRX SuperLite is the lighter rail-mount option for ISR-equipped beds, keeping the 24,000-lb rating while shaving weight for an easier lift. Ride is a touch less plush than the Super 5th, and the value tips slightly more in your favor.

A 24K Q-Series sliding fifth wheel for short beds, bolting to standard rails and sliding manually to give your trailer cab clearance in tight spots. The dual-pivot head rides smoother than the A-Series, but the manual slider means climbing in the bed to set it.

The Hijacker 21K Autoslide is an above-bed rail-mount auto-slider that clears the cab in turns for short-bed trucks. The combo of rails and auto-slide makes it the fussiest Demco to set up, but it handles 21K and keeps short-bed towing safe at a fair price.

The 20K SuperGlide rail unit is the auto-sliding short-bed solution for rail-equipped trucks pulling up to 20,000 lbs. It moves the pivot automatically on turns to keep the trailer off the cab; you'll need rails in the bed and the slider adds heft.

The 20K SuperLite is a lighter rail-mount fixed head rated for 20,000 lbs, easier to wrestle in and out than the Super 5th while keeping strong build quality. It bolts to standard rails and tows well, trading a little ride refinement for the lower weight.

A 20K A-Series sliding fifth wheel built for short-bed trucks, mounting to standard rails and sliding manually for cab clearance in sharp turns. Good value and a full-articulation head, with the usual short-bed slider trade-off of more hands-on hookup.

A sliding 18K Patriot for short-bed trucks running standard rails, giving you turning clearance without stepping up to a Companion. The slider mechanism makes install and use a bit more involved, and the ride is good but not cushioned-head smooth.

An 18K Hijacker Autoslide that mounts above the bed on rails and auto-shifts in tight turns for short-bed rigs. Solid value for an auto-slider, but the above-bed rail setup plus slide hardware makes install the heaviest lift in the lineup.

This 18K Hijacker Autoslide comes with rails for a complete short-bed auto-slide package. It clears the cab automatically in sharp turns and prices well, though wrestling rails and the slide mechanism into place makes setup a bigger job.

The 16K SuperGlide rail version automatically slides on turns for short-bed cab clearance, sized for 16,000-lb trailers on rail-equipped trucks. Smooth, safe towing once you've got the rails installed, with the slider mechanism adding weight.

A 16K A-Series sliding fifth wheel for short-bed trucks, bolting to standard rails and sliding manually to clear the cab in tight turns. The articulating head and price make it a strong value, though the manual slide adds a step at hookup.

A 16K E-Series sliding fifth wheel for short beds, mounting to standard rails with a single-pivot head and a manual slide for cab clearance. It's the budget short-bed option, capable but noisier and less articulating than the A-Series slider.

The Hijacker 13K Autoslide is the light-duty above-bed auto-slider for half-tons pulling smaller fifth wheels in short beds. The 13K rating keeps it to lighter trailers, and while the auto-slide adds install effort, it's an affordable way to tow safely with limited bed length.

The Gen 3 Goose Box (20K) swaps your trailer's pin box for an air-ride gooseneck coupler, freeing up the truck bed entirely. The air cushion smooths the ride and cuts chucking, making it the standout pin-box conversion if you'd rather pull a fiver off a gooseneck ball.

The 24K Super 5th here mounts onto an existing gooseneck ball, turning a gooseneck-equipped truck into a 24,000-lb fifth-wheel rig without rails. Premium build and a quiet ride, and it's an easy drop-on if you've already got the ball in the bed.

This Recon 21K Flat Deck mounts a fifth wheel onto a recessed gooseneck ball, keeping the bed flat when the hitch is off. Easy to drop onto an existing ball at a fair price, though it's fixed-head only and the tow is solid without being smooth.

The Recon 21K Gooseneck Ball-Mount lets you run a fifth wheel off any existing 2-5/16in gooseneck ball, so it drops on without a rail or puck install. Versatile and good value, but it's a fixed head with no cushioning and articulation is just adequate.

The 20K SuperLite is a lighter gooseneck-ball fifth-wheel head that drops onto an existing ball for a 20,000-lb tow with no rails required. Easier to handle than the Super 5th and a bit cheaper, with only a slight give in ride smoothness.

The Recon Stealth 20K is a folding gooseneck ball-mount that sets a fifth wheel onto any 2-5/16in ball and folds down for a clear bed. Handy and well-priced for ball-mount towing, but the 20K fixed head trades a bit of capacity and ride polish versus dedicated puck units.

The Gen 3 Goose Box (20K) swaps your trailer's pin box for an air-ride gooseneck coupler, freeing up the truck bed entirely. The air cushion smooths the ride and cuts chucking, making it the standout pin-box conversion if you'd rather pull a fiver off a gooseneck ball.