Fifth wheel hitches for your
2017 GMC Sierra 2500

The 27K M5 in GM puck trim fits 2016-2019 Silverado/Sierra HD beds with factory prep. It drops into the pucks for a clean fixed mount and tows steadily, a capable middle-of-the-range Reese for GM diesel owners.

A fixed 20K Companion for factory puck beds, delivering the cushioned head and full articulation that make these so easy to live with. No rails to bolt in and it lifts out by hand when you need the bed clear.

The 20K Companion Slider buys short-bed trucks the room to jackknife without crunching the trailer cap. The manual slide is the trade-off, but you keep the cushioned, chucking-free tow the Companion is known for.

A 20K SuperGlide puck-mount auto-slider that handles the short-bed turning problem on its own, no manual sliding required. Smooth tow and clever engineering for 20,000-lb trailers, offset only by the extra mass and setup of the sliding mechanism.

The 20K M5 in GM puck form fits 2016-2019 Silverado/Sierra HD beds with factory prep. It seats in the pucks for a quick fixed install and gives a stable, low-chuck tow for typical fifth-wheel loads.

The A16 puck-mount fifth wheel for GM 2500/3500, rated 16K with Curt's spherical articulating head. Drops into the factory pucks and gives GM owners a capable, well-priced option for lighter fivers.

A 16K SuperGlide puck-mount auto-slider for short beds, automatically repositioning during tight turns so you never clip the cab. Excellent tow quality for 16,000-lb trailers, with the trade-off being the heavier, more complex sliding mechanism.

A 25K A-Series sliding fifth wheel for short-bed trucks, bolting to standard rails and sliding manually to clear the cab in tight turns. The articulating head and value are strong, though the slider takes more effort than a fixed head and a bit more to install.

The 24K SuperGlide rail version brings PullRite's automatic short-bed slider to trucks set up with standard rails, self-sliding on turns for full cab clearance. Tows great for 24,000 lbs, but you need the rails installed and the auto-slide head is heavy.

The 24K ISRX Super 5th is a fixed rail-mount head designed for ISR rail systems, rating 24,000 lbs with the premium Super 5th build. Solid and quiet on the road, provided your bed already has the ISR rails to bolt it to.

The 24K ISRX SuperLite is the lighter rail-mount option for ISR-equipped beds, keeping the 24,000-lb rating while shaving weight for an easier lift. Ride is a touch less plush than the Super 5th, and the value tips slightly more in your favor.

A 24K Q-Series sliding fifth wheel for short beds, bolting to standard rails and sliding manually to give your trailer cab clearance in tight spots. The dual-pivot head rides smoother than the A-Series, but the manual slider means climbing in the bed to set it.

The Hijacker 21K Autoslide is an above-bed rail-mount auto-slider that clears the cab in turns for short-bed trucks. The combo of rails and auto-slide makes it the fussiest Demco to set up, but it handles 21K and keeps short-bed towing safe at a fair price.

The 20K SuperGlide rail unit is the auto-sliding short-bed solution for rail-equipped trucks pulling up to 20,000 lbs. It moves the pivot automatically on turns to keep the trailer off the cab; you'll need rails in the bed and the slider adds heft.

The 20K SuperLite is a lighter rail-mount fixed head rated for 20,000 lbs, easier to wrestle in and out than the Super 5th while keeping strong build quality. It bolts to standard rails and tows well, trading a little ride refinement for the lower weight.

A 20K A-Series sliding fifth wheel built for short-bed trucks, mounting to standard rails and sliding manually for cab clearance in sharp turns. Good value and a full-articulation head, with the usual short-bed slider trade-off of more hands-on hookup.

A sliding 18K Patriot for short-bed trucks running standard rails, giving you turning clearance without stepping up to a Companion. The slider mechanism makes install and use a bit more involved, and the ride is good but not cushioned-head smooth.

An 18K Hijacker Autoslide that mounts above the bed on rails and auto-shifts in tight turns for short-bed rigs. Solid value for an auto-slider, but the above-bed rail setup plus slide hardware makes install the heaviest lift in the lineup.

This 18K Hijacker Autoslide comes with rails for a complete short-bed auto-slide package. It clears the cab automatically in sharp turns and prices well, though wrestling rails and the slide mechanism into place makes setup a bigger job.

The 16K SuperGlide rail version automatically slides on turns for short-bed cab clearance, sized for 16,000-lb trailers on rail-equipped trucks. Smooth, safe towing once you've got the rails installed, with the slider mechanism adding weight.

A 16K A-Series sliding fifth wheel for short-bed trucks, bolting to standard rails and sliding manually to clear the cab in tight turns. The articulating head and price make it a strong value, though the manual slide adds a step at hookup.

A 16K E-Series sliding fifth wheel for short beds, mounting to standard rails with a single-pivot head and a manual slide for cab clearance. It's the budget short-bed option, capable but noisier and less articulating than the A-Series slider.

The Hijacker 13K Autoslide is the light-duty above-bed auto-slider for half-tons pulling smaller fifth wheels in short beds. The 13K rating keeps it to lighter trailers, and while the auto-slide adds install effort, it's an affordable way to tow safely with limited bed length.

The Gen 3 Goose Box (20K) swaps your trailer's pin box for an air-ride gooseneck coupler, freeing up the truck bed entirely. The air cushion smooths the ride and cuts chucking, making it the standout pin-box conversion if you'd rather pull a fiver off a gooseneck ball.

The 24K Super 5th here mounts onto an existing gooseneck ball, turning a gooseneck-equipped truck into a 24,000-lb fifth-wheel rig without rails. Premium build and a quiet ride, and it's an easy drop-on if you've already got the ball in the bed.

This Recon 21K Flat Deck mounts a fifth wheel onto a recessed gooseneck ball, keeping the bed flat when the hitch is off. Easy to drop onto an existing ball at a fair price, though it's fixed-head only and the tow is solid without being smooth.

The Recon 21K Gooseneck Ball-Mount lets you run a fifth wheel off any existing 2-5/16in gooseneck ball, so it drops on without a rail or puck install. Versatile and good value, but it's a fixed head with no cushioning and articulation is just adequate.

The 20K SuperLite is a lighter gooseneck-ball fifth-wheel head that drops onto an existing ball for a 20,000-lb tow with no rails required. Easier to handle than the Super 5th and a bit cheaper, with only a slight give in ride smoothness.

The Recon Stealth 20K is a folding gooseneck ball-mount that sets a fifth wheel onto any 2-5/16in ball and folds down for a clear bed. Handy and well-priced for ball-mount towing, but the 20K fixed head trades a bit of capacity and ride polish versus dedicated puck units.

The Gen 3 Goose Box (20K) swaps your trailer's pin box for an air-ride gooseneck coupler, freeing up the truck bed entirely. The air cushion smooths the ride and cuts chucking, making it the standout pin-box conversion if you'd rather pull a fiver off a gooseneck ball.